Modern Fencing Others
ULAMEX supplies a complete range of fence accessories and mounting hardware for modern fencing systems. From post caps and slat brackets to self-drilling screws, base plates and gate fittings -- every component needed to complete a professional fence installation is available from a single source. All accessories are colour-matched to our fence profiles in standard RAL finishes.
Mounting Components for Complete Fence Installations
A professionally finished fence requires more than posts and slats. The right accessories ensure structural integrity, clean visual lines and long-term durability. ULAMEX fence accessories are engineered to work seamlessly with our fence profiles and posts and are equally compatible with third-party aluminium and steel fence systems.
Post caps
flat and decorative aluminium caps that protect the open ends of square posts (60x60, 80x80, 100x100 mm) from water ingress and debris. Available in matching RAL colours or raw aluminium.
Slat brackets
the primary connection elements between slats and posts. Available as starter brackets (end of fence run), intermediate brackets (between consecutive panels), corner brackets (90-degree turns) and end brackets. Manufactured from aluminium or stainless steel for maximum corrosion resistance.
Self-drilling screws
stainless steel or bi-metal self-drilling screws designed for connecting aluminium and steel components without pre-drilling. Supplied in sets with colour-matched heads to preserve the uniform appearance of the fence.
Mounting angles
L-shaped brackets (including 15x15 mm and larger) for connecting cross-rails to posts and for structural reinforcement at panel junctions.
Base plates and anchors
steel or aluminium foot plates for bolt-down post installation on concrete or masonry. Available with pre-drilled holes for expansion anchors or chemical fixings.
Gate hardware
hinges, latches, locks and self-closing mechanisms for fence gates and wickets. Heavy-duty stainless steel hinges rated for gate weights up to 100 kg.
All accessories are also suitable for use with galvanised panel fences and general metal fence systems. For an overview of the full modern fencing range, visit our modern fencing system parent category.
| Accessory type | Materials | Sizes / Variants | Finish |
|---|---|---|---|
| Post cap (flat) | Aluminium | 60x60, 80x80, 100x100 mm | RAL powder-coated or raw |
| Post cap (decorative) | Aluminium | 80x80, 100x100 mm | RAL powder-coated |
| Starter bracket | Aluminium / Stainless steel | For posts 60-100 mm | RAL or brushed steel |
| Intermediate bracket | Aluminium / Stainless steel | For posts 60-100 mm | RAL or brushed steel |
| Corner bracket (90 deg.) | Aluminium / Stainless steel | For posts 60-100 mm | RAL or brushed steel |
| End bracket | Aluminium / Stainless steel | For posts 60-100 mm | RAL or brushed steel |
| Self-drilling screw | Stainless steel A2 / Bi-metal | 4.8x19, 5.5x25, 5.5x32 mm | Colour-matched head |
| Mounting angle 15x15 | Steel, powder-coated | 15x15 mm | RAL matched |
| Base plate (bolt-down) | Steel / Aluminium | For posts 60-100 mm | Hot-dip galvanised or RAL |
| Gate hinge (heavy-duty) | Stainless steel A2/A4 | For gates up to 100 kg | Brushed or RAL |
| Gate latch / lock | Stainless steel | Universal | Brushed steel |
| Rubber grommet | EPDM rubber | Various | Black |
Fence Accessories -- Overview
Why Order Fence Accessories from ULAMEX
Colour-matched components -- all brackets, caps and screws available in matching RAL 7016, RAL 9005, RAL 7035 or RAL 9006
Complete system compatibility -- designed for ULAMEX fence profiles and compatible with most European fence systems
Corrosion-resistant materials -- stainless steel A2/A4 and aluminium for long-term outdoor use
Wholesale packaging -- bulk quantities for professional contractors and distributors
Single-source supply -- profiles, slats, posts and accessories in one shipment, reducing logistics costs
EN 1090 | ISO 3834 -- certified quality from a trusted European supplier since 1988
Frequently Asked Questions
What accessories do I need for a complete fence installation?
A standard installation requires: post caps (one per post), starter brackets (for first and last panel), intermediate brackets (for each panel junction), self-drilling screws (quantity depends on slat count), and optionally base plates if posts are not concreted. For fence gates, add hinges, a latch or lock, and a self-closing mechanism if required.
Are fence accessories available in colours other than anthracite?
Yes. All brackets, caps and screw heads are available in RAL 7016 (anthracite), RAL 9005 (black), RAL 7035 (grey) and RAL 9006 (silver). Custom RAL colours can be produced for wholesale orders to match your fence profile colour exactly.
Can ULAMEX accessories be used with other fence brands?
Our accessories are designed for standard aluminium and steel fence profiles with square post cross-sections of 60x60 to 100x100 mm. They are compatible with most European fence systems using similar dimensions. For non-standard systems, contact us with your specifications and we will confirm compatibility.
What type of screws should I use for aluminium fence assembly?
We recommend stainless steel A2 self-drilling screws with colour-matched painted heads. These screws drill directly into aluminium without pre-drilling, ensuring a fast and secure connection. Bi-metal self-drilling screws are recommended for connections involving steel components.
Does ULAMEX supply gate hardware for modern fencing systems?
Yes. We supply heavy-duty stainless steel gate hinges (rated for gates up to 100 kg), gate latches, locks and self-closing mechanisms. All gate hardware is designed for aluminium and steel fence gates. Request a quote for gate hardware and complete gate kits.
Request a Quote for Fence Accessories
Need mounting hardware and accessories for your fencing project? ULAMEX supplies complete accessory kits matched to your fence system -- from post caps to gate hardware. Contact us for a non-binding quotation.
+48 504 424 761 | [email protected]
End of content
End of content